Sensepoint Flammable and Toxic Gas Detector

Sensepoint Flammable and Toxic Gas Detector

ATEX certified flammable, toxic and Oxygen gas detectors offering a low cost solution to hazardous area monitoring.

The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a low cost solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, a detector can be installed using conduit or armored cable and glands depending on individual site standards.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres and allow for hands free, unhindered access, to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armored cable and glands or conduit.

Category:

Additional Information

Supplied with earth continuity plate for improved immunity to RFI the junction box offers the installer a choice of 1/2”, 3/4” and M20 connection via conduit or armored cable and Exe certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics’ range of Touchpoint controllers.

Features & Benefits

One-Stop Shop
•  Flammable, toxic and Oxygen versions available
•  Suitable for indoor or outdoor use
•  IP65 as standard

Proven Sensor Technology
•  SurecellTM electrochemical sensors
•  Poison resistant catalytic bead
•  Fast and reliable
•  Typical 2 to 5 years operational life

ATEX Certified
•  Complies with the latest European standards
•  Hazardous area approval AND performance
•  Can be used for uncertified applications

Easy to Use
•  Factory set operation
•  Simple to replace
•  Minimal training required

Friendly Installation
•  Universal junction box
•  One box, three entries
•  Metric and NPT compatibility
•  Includes earth continuity plate for added RFI protection

Range of Accessories
•  Weather Housing (IP66)
•  Flow adaptor
•  Duct mounting kit
•  Collecting cone

 

Specifications

Sensepoint-Flammable-and-Toxic-Gas-Detector-Specifications

Reviews

There are no reviews yet.

Be the first to review “Sensepoint Flammable and Toxic Gas Detector”

Your email address will not be published. Required fields are marked *

Related products